Specs
- Print method: Thermal Transfer / Direct Thermal
- Resolution: 203 dpi (8 dot/mm) / 300 dpi (12 dot/mm) / 600 dpi (24 dot/mm)
- Print speed: Up to 16 ips (406 mm/s) / Up to 12 ips (305 mm/s) / Up to 8 ips (203 mm/s)
- Print width: 4.09” (104 mm) / 4.09” (104 mm, up to 105.7 mm) / 4.09” (104 mm, up to 105.6 mm)
- Print length: Min. 0.12” (3 mm)* Max. 279.53” (7100 mm) / Min. 0.12” (3 mm)* Max. 125.98” (3200 mm) / Min. 0.12” (3 mm)** Max. 31.50” (800 mm)
- Processor: 32 Bit RISC CPU
- Memory: 256MB Flash; 256MB SDRAM; 16GB for display
- Interfaces:
- USB 2.0 (Type B)
- Serial port (RS-232)
- Ethernet 10/100 Mbps (IEEE 802.1X ‒ TBD)
- USB Host * 3 (Type A) 2 ports at the front panel, 1 port at the rear panel
- Ribbon:
- Types: Wax, wax/resin, resin
- Length: Max. 1476’ (450 m)
- Width: Min. 1.18” (30 mm) ‒ Max. 4.33” (110 mm)
- Ribbon roll diameter: 3” (76.2 mm)
- Core diameter: 1” (25.4 mm)
- Control Panel:
- Backlight 5” touch screen LCD supports on-board videos
- 1 Power on/off button with blue color LED backlight
- 1 Control key: FEED/PAUSE/CANCEL with three color LED backlight: Ready (Blue); Error (Red); Calibration (Green)
- 1 Calibration button
